Table of Contents
Advertisement
We pride itself on quality and service, ensuring that at the time of
packaging the contents are supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your
dealer immediately.
Installation
Note: If the unit has been stores or moved in an upright position, let
it stand upright for approximately 12 hours before operation. If in
doubt allow to stand.
1. Remove the appliance from the packaging. Make sure that all
protective plastic film and coatings are thoroughly removed from all
surfaces.
2. Maintain a distance of 20cm (7 inches) between the unit and walls or
other objects for ventilation. Increase this distance if the obstacle is a heat
resource.
Note: Before using the appliance for the first time, clean interior with
soapy water.
3. Level the appliance by adjusting the screw feet.
6
Advertisement
Table of Contents
