Table of Contents
Advertisement
Fit Glass Panels
1. Screw the collars to the rim of the appliance.
Note: Ensure the hole in the collar for the grub screw faces inwards.
2. Slot the two sides panels into the collars, with the holes in the glass at
the top.
3. Insert the collar into the glass hole, equip the bracket inside the glass
panel fixed by the knurled screw.
Note: Ensure that the collar and bracket touch the screw.
4. Slot the rear panel into the collars, with the holes in the glass at the top.
5. Screw the brackets to the inside of each glass collar using the knurled
screws.
6. Insert the glass collar into the top glass panel holes.
7. Place the top panel onto the brackets, ensuring all holes line up.
8. Fix the front panel to the bracket using knurled screws.
7
Advertisement
Table of Contents
