Table of Contents
Advertisement
Troubleshooting
If your appliance develops a fault, please check the following table before
call your dealer.
Fault
The appliance is not
working.
The appliance turns
on, but the
temperature is too
high/low.
The appliance is
unusually loud
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Condenser blocked with dust
Appliance is located near a heat
source or air flow to the
condenser is being interrupted.
Ambient temperature is too high
Unsuitable foodstuffs are being
stored in the appliance
Appliance is overloaded
Loose nut/screw
The appliance has not been
installed in a level or stable
position
Action
Check the unit is plugged in
correctly and switched on
Call your agent or qualified
Technician
Replace the fuse
Check power supply
Call your agent or qualified
Technician
Call your agent or qualified
Technician
Move the refrigerator to a
more suitable location
Increase ventilation or move
appliance to a cooler position
Remove any excessive hot
foodstuffs or blockages to the
fan
Reduce the amount of food
stored in the appliance
Check and tighten all nuts and
screws
Check installation position and
change if necessary
10
Advertisement
Table of Contents
