Biostar 945P-A7G Setup Manual page 86

945P-A7G/945PL-A7G
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
Min= 100, Max= 265,Key in a DEC number.
The Choices: 100MHZ (default).
Special Notice:
If unfortunately, the system's frequency that you are selected is not functioning, there are
two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as "ON" status. All the
CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on pressing the
<Insert> key until the power-on screen showed. This action will boot-up the system
according to FSB of the processor.
PCIE Clock select
The Choices: Upto CPU(default), Fixed 100, Manual
PCIE Clock
This item will activated only when "PCIE Clock Select" is set to "Manual"
The Choices: Min= 100, Max= 200, Key in a DEC number.
PCI Clock
The Choices: 33.33Mhz(default), 33.80Mhz, 34.29Mhz, 34.78Mhz, 35.29Mhz,
35.82Mhz, 36.36Mhz, 36.92Mhz, 37.50Mhz.
It's strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.
36