Biostar 945P-A7G Setup Manual page 66

945P-A7G/945PL-A7G
DRAM RAS# PRECHARGE
If an insufficient number of cycles is allowed for RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete, and the DRAM may fail to retain data.
Fast gives faster performance; and Slow gives more stable performance. This field
applies only when synchronous DRAM is installed in the system.
The Choices: Auto (default), 2,3,4,5,6.
PRECHARGE DELAY (TRAS)
This item controls the number of DRAM clocks to activate the precharge delay.
The Choices: Auto (default),4/5/6/7/8/9/10/11/12/13/14/15.
SYSTEM MEMORY FREQUENCY
This item allows you to select the Memory Frequency.
The Choices: Auto (default), 400Mhz,533Mhz,667Mhz.
SLP S4# ASSERTION WIDTH
This item sets the minimum assertion width of the SLP-S4# signal to guarantee the
DRAM has been safely power-cycled.
The Choices: 4 to 5 Sec (default), 3 to 4 Sec, 2 to 3 Sec ,1 to 2Sec.
SYSTEM BIOS CACHEABLE
Selecting Enabled allows you caching of the system BIOS ROM at F0000h~FFFFFh,
resulting a better system performance. However, if any program writes to this memory
area, a system error may result.
The Choices: Enabled (default), Disabled.
VIDEO BIOS CACHEABLE
Select Enabled allows caching of the video BIOS, resulting a better system performance.
However, if any program writes to this memory area, a system error may result.
The Choices: Disabled (default), Enabled.
MEMORY HOLE AT 15M-16M
You can reserve this area of system memory for ISA adapter ROM. When
this area is reserved it cannot be cached. The user information of
peripherals that need to use this area of system memory usually2
discussed their memory requirements.
The Choices: Disabled (default), Enabled.
16