Biostar 945P-A7G Setup Manual page 70

945P-A7G/945PL-A7G
On-chip Secondary PCI IDE
This item allows you to enable or disable the primary/ secondary IDE Channel.
The Choices: Enabled (default), Disabled.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard
drives in your system. As well, your operating environment requires a DMA driver
(Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive and
your system software both support Ultra DMA/100, select Auto to enable BIOS
support.
The Choices: Auto (default), Disabled.
SATA Mode
T
his item allows you to choose SATA Mode.
The Choices: IDE (default),RAID,AHCI.
On-Chip Serial ATA
This item allows you to set the onboard SATA controller.
The Choices: Enhanced Mode (default), Auto, Combined Mode, Disabled,
SATA only.
SATA PORT Speed Settings
This item allows you to set SATA PORT Speed.
The Choices: Disabled (default),Force GEN I, Force GEN II.
PATA IDE Mode
This item allows you to choose PATA IDE Mode.
The Choices: Primary (default), Secondary.
20