Ionizer; Defrost Operation; Auto Clean - LG MD19GQGE0 Owner's Manual

Hide thumbs Also See for MD19GQGE0:
Table of Contents

Advertisement

Ionizer

When you want to remove harmful bacteria in the air.
- Select it by pressing Ionizer button.
- It removes harmful material in the air such as bacteria, virus, etc. using ionized air.
- You can use Ionizer function and dehumidification function at the same time.
- Ionizer can be used at any time regardless of dehumidifier function.

Defrost Operation

If there is frost in the heat exchanger due to low indoor temperature, it automatically removes the
frost.
- During the operation, if 'dF' is displayed on the display, it automatically runs the defrost in the heat
exchanger inside the product.
- Compressor is stopped during the automatic defrost operation.

Auto Clean

This function dries inside of the dehumidifer in order to prevent mold or germs.
- Press the operation mode button for about 3 seconds during operation to set up Auto Clean.
- Each time the operation mode button is pressed for 3 seconds: Auto Clean → settings cancellation then it
repeats
- When running Auto Clean a
- After Auto Clean function finishes, the LED display automatically turns off.
- When the operation stops, the Auto Clean will start.
When Auto Clean function starts, the dehumidifier will run the fan for a certain period in order to remove
moisture inside the product. (Duration: about 5 minutes)
is displayed on the display.
HOW TO USE
15
EN

Advertisement

Table of Contents
loading

Table of Contents