Table of Contents
Advertisement
3
DIP Switches
The QuickPanel View is equipped with four DIP switches that control separate
functions.
DIP switches are set to "OFF" by default in the factory. DIP switch 2 is the
Force Startup switch. Turning this switch on forces the startup applications to
run when the operating system is started.
When the switch is set to "OFF", the QuickPanel View operates normally,
displaying the startup splash screen. You can skip running the startup
applications by tapping the "Don't run StartUp Programs" button on the startup
splash screen.
3-28
6" QuickPanel* View Basic, Monochrome, Thin Bezel – September 2010
GFK-2328B
Advertisement
Table of Contents
