Biostar Hi-Fi P61S2 Manual page 30

Hi-Fi P61S2 UEFI BIOS Manual
Power Limit 2 Value (Watt)
This item sets Power Limit Value which CPU must not exceed in a short
duration time.
Options: 97 (Default)
CPU Turbo Mode
This item enables/disables CPU Turbo Mode.
Options: Enabled (Default) / Disabled
DDR3 DRAM Timing Control
This item allows you to choose to manually or automatically regulate the
DRAM Timing.
Options: By SPD (Default) / Manual / XMP Profile 1 / XMP Profile 2
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
DRAM Command Rate
This item allows you to select command rate of DDR3.
Options: Auto (Default) / 1T / 2T
CAS# Latency (tCL)
This item allows you to select CAS Latency of DDR3.
Options: 11 (Default) / 3 ~ 15
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay of
DDR3.
Options: 11 (Default) / 3 ~ 15
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time of DDR3.
Options: 11 (Default) / 3 ~ 15
29