Table of Contents
Advertisement
Quick Links
WARNING: For Outdoor Use Only. Installation and service must be performed by a
qualified installer, service agency, or the gas supplier.
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury, or loss of life.
WARNING: Do not store or use gasoline, or other flammable vapors and liquids, in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use shall not be stored in the vicinity of this or any other
appliance.
DANGER: FIRE OR EXPLOSION HAZARD
If you smell gas:
Shut off gas to the appliance.
Extinguish any open flame.
If odor continues, leave the area immediately.
After leaving the area, call your gas supplier or fire department.
Failure to follow these instructions could result in fire or explosion, which could cause
property damage, personal injury, or death.
INSTALLER: Leave this manual
with the appliance.
CONSUMER: Retain this
manual for future reference.
Copyright 2020, T.I.
$10.00
Tempest Lantern 50K 24V
Owner's Manual
Omni-Test Laboratories, Inc.
ANSI Z21.97-2017 /CSA 2.41-2017
Outdoor Decorative Gas Appliances
Hot glass will
cause burns.
Do not touch
glass until
cooled.
Never allow
children to
touch glass.
(sku 94900748)
Listed by
Report #0028GM083S
CARBON MONOXIDE
HAZARD
This appliance can produce
carbon monoxide which has
no odor.
Using it in an enclosed
space can kill you.
Never use this appliance in
an enclosed space such as a
camper, tent, car, or home.
French language manuals at
tempesttorch.com
Manuels de langue Française à
tempesttorch.com
Part # 100-01569
Advertisement
Table of Contents
Related Manuals for Travis Industries Tempest Lantern
Summary of Contents for Travis Industries Tempest Lantern
- Page 1 Tempest Lantern 50K 24V Owner’s Manual (sku 94900748) Listed by Omni-Test Laboratories, Inc. ANSI Z21.97-2017 /CSA 2.41-2017 Outdoor Decorative Gas Appliances Report #0028GM083S WARNING: For Outdoor Use Only. Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
-
Page 2: Overview
A copy is shown to the right. Important Registration and Service Information No other Tempest Lantern has the same serial number as yours. The serial number is on the safety label attached by a chain near the control panel. This serial number will be needed in case you require service of any type. -
Page 3: Table Of Contents
Troubleshooting Table ......27 Wire Configuration - Direct-Run vs Warranty ..........28 Daisy-Chain Installations ....12 Index ............30 Lantern Wiring Diagram ......13 © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... - Page 4 Improper psi (3.5 kPa). installation will void the warranty and safety listing. • Travis Industries, Inc. grants no warranty, implied • This appliance is approved for either natural gas or stated, for the installation or maintenance of (NG) or propane (LP).
-
Page 5: Features
24 Volts AC, 1.6 amps (on startup), 40 watts (on startup) Dimensions: NOTE: Side clearances are measured from the glass – Top clearances are measured from the glass frame. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 6: Installation Warnings
(not supplied). Notify your insurance company before hooking up this appliance. All relevant information on the Tempest Lantern is located on page 2, Important Information. You provide them on page 2. The requirements listed below are divided into sections. All requirements must be met simultaneously. -
Page 7: Recommended Order Of Installation
Leak test the gas lines. Verify the Lantern works correctly and there are no gas leaks. Attach the control covers. 10. Give the manual to the homeowner and explain the operation of the Lantern. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 8: Placement Requirements
Lesser clearances shall be permitted to be used only where acceptable to the authority having jurisdiction. Keep combustibles away from the shaded heat zone of the Lantern (see illustration below). © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 9: Gas Line Requirements
See the table below for details. Input Rating (BTU/h) 50,000 45,000 Orifice Size (DMS) Manifold Pressure 7" wc 11" wc Max. Inlet Pressure 7" wc 11" wc © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 10: Lp Conversion
2. Use a Philips screwdriver to remove the (2) screws that secure the orifice manifold and air restrictor to the burner head assembly (set the screws aside for reinstallation). © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 11: Gas Line Connection
Continue with the rest of the installation process. Gas Line Connection A manual shutoff valve is required on the gas supply to the Lantern. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 12: Electrical Connection Requirements
This Lantern must be used with a 24VAC switched circuit. The transformer is sold separately. Travis Industries offers the following transformer: -- 94800830 Powers 1 to 6 Lanterns (120v input only with 26v and 28v output leads). See the instruction sheet included with the transformer for details. -
Page 13: Lantern Wiring Diagram
Do not reverse the wires. If the wires are reversed, the Lantern will not work correctly. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 14: Wiring Multiple Transformers To One Switch
A T T E N T I O N Hot (Black) Common (White) Ground (Green) WA R N I N G A T T E N T I O N © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 15: Wiring Multiple Lanterns To One Transformer
Hot (Black) Common (White) Ground (Green) Direct-Run Example WA R N I N G A T T E N T I O N Hot (Black) Common (White) Ground (Green) © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 16: Daisy-Chain Wire Length Chart
104' 14 G 242' 157' 113' 160' 12 G 369' 238' 173' 134' 108' 245' 144' 10 G 566' 366' 266' 206' 165' * Not available on some transformers. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 17: Direct-Run Wire Length Chart
AWG#14 = 14 gauge, 10AWG = 10 gauge, etc.). Do not use wires of dissimilar gauges (do not use 14 gauge & 10 gauge wire on the same transformer). © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 18: Polarity
Lanterns are connected in parallel (all yellow wires connected together and all white/yellow stripe wires connected together). Polarity between the Lanterns and the transformer does not matter. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 19: Post Mount And Control Cover Installation
(d) Attach the control cover to the Lantern with the two thumbscrews. ! The safety label slides into place between the control cover and the Lantern body. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 20: Lantern Assembly
(e.g. paper towel). (c) Place the cap on the top of the Lantern glass assembly. The cap will friction fit to assembly. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 21: Glass Vibration Set Screws (Optional)
Move the glass back and forth while tightening the set screw. Once the set screw contacts the glass enough to stop the movement, the set screw is tight enough. DO NOT OVERTIGHTEN THE SET SCREWS OR THE GLASS WILL BREAK. © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 22: Post Or Pier Mounted Lantern
Post or Pier Mounted Lantern (Optional The tempest Lantern may be mounted to a 3” diameter post using the included post mount. This post may be surface mounted on a deck or similar platform with the optional post base kit. If the post is placed in a remote location, it may be sunk into the ground using concrete or other suitable means. -
Page 23: Wall Mounted Lantern (Optional)
Wall Mounted Lantern (Optional) The tempest Lantern may be mounted to an external wall an optional wall mount kit. Make sure that all clearances are can be maintained in your application. See the wall mount kit for assembly and installation instructions. -
Page 24: Before You Begin
Inspect the Lantern, burner, and supply lines for any damage prior to operation. The burner must be replaced prior to the appliance being put into operation if it is evident that the burner is damaged. Use only Travis Industries replacement burners. It may be difficult to see the burner operating in direct sunlight. -
Page 25: Maintaining Your Lantern
The stainless steel burner top will discolor – this is normal. Your Tempest Lantern is designed to be cleaned and maintained easily. The most common maintenance that your Lantern will require is glass cleaning. This is done by loosening the glass retaining screws. -
Page 26: Replacement Parts
Maintenance Replacement Parts Replacement parts can be obtained from your Tempest Lantern retailer (see www.tempesttorch.com). © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 27: Troubleshooting Table
THIS IS NORMAL Lantern makes Clicking Glass is moving inside the glass frame and the stainless steel parts Sounds are expanding and contracting with heat © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v... -
Page 28: Warranty
2. Travis Industries has the option of either repairing or replacing the defective component. 3. If your dealer is unable to repair your appliance's defect during the warranty period, they will process a warranty claim through TRAVIS INDUSTRIES, INC. The dealer will require you to supply a copy of your receipt showing the date of the appliance's purchase and the serial number on your appliance. - Page 29 Warranty © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v...
-
Page 30: Index
Post or Pier Mounted Lantern ........................22 Registration ..............................2 Replacement Parts ............................26 Troubleshooting Table ..........................27 Wall Mounted Lantern ..........................23 Winterizing the Lantern ..........................25 Wiring Diagram ............................13 Index © Travis Industries, Inc. 4/13/22 - 1569 Tempest Lantern 50k 24v...
Need help?
Do you have a question about the Tempest Lantern and is the answer not in the manual?
Questions and answers