Display.setting - Toshiba BDX3100KB Owner's Manual

Display Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press  to.select.[Display Setting],
then.press...
3. Select an option, press  to.access.
... Display Setting...
TV
Video Process
Motion Video...
Move cursor key to select menu option
then use "OK" key to select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[TV]
• [TV Screen]
Select.the.screen.format.according.to.
how.you.want.the.picture.to.appear.on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio of 4:3, the output video is
stretched.into.16:9.full.screen.
{16:9 Normal}.–.for.a.disc.with.the.
aspect ratio of 4:3, the output video is
resized.vertically.to.match.what.will.be.
seen.on.the.display.
{4:3 Pan&Scan} – for standard TV,
Display.a.wide.picture.on.the.entire.
screen.and.cuts.off.the.redundant.
portions.
{4:3 Letterbox} – for standard TV,
Display.a.wide.picture.with.two.black.
borders.on.the.top.and.bottom.of.4:3.
screen.
• [Resolution]
Select.a.video.output.resolution.that.is.
compatible.with.your.TV.display.
capability.
{Auto}.–.Select.the.most.suitable.
resolution.according.to.the.TV..
{480I/576I}, {480P/576P},
{720P}, {1080I}, {1080P}.
–.Select.a.video.resolution.setting.that.
is.best.supported.by.the.TV..See.TV.
manual.for.details.
• [Color Space]
Select a predefined Color space of
picture.
0
TV Screen 16:9 Full
Resolution Auto
Color Space YCbCr422
HDMI Deep color Off
HDMI 1080P 24F On
SETUP Exit
{RGB}.–.select.RGB.Color.space.
{YCbCr}.–.select.YCbCr.Color.space.
{YCbCr422}.–.Select.YCbCr422.Color.
space.
{Full RGB}.–.select.Full.RGB.Color.
space.
• [HDMI Deep Color]
This.feature.is.available.only.when.the.
display.device.is.connected.by.a.HDMI.
cable, and when it supports deep Color
feature.
{30 bits}.–.Output.30.bits.Color.
{36 bits}.–.Output.36.bits.Color.
{Off}.–.Output.standard.24.bit.Color.
• [HDMI 1080p 24F]
{On}.–.Enable.1080p.24F.video.
resolution.setting.
{Off}.–.Disable.1080p.24F.video.
resolution.setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes
- This resolution becomes effective only
when the playing BD-Disc contents are Film
source.
- During HDMI 1080p 24F playback, there
will be no composite output.
• [HDMI 3D]
Turn.on.or.off.the.3D.function.
{Auto}.–.Opening..the.3D.function.of.
player.
{Off}.–.Turn.off.the.3D.function.
When you play a side by side 3D disc,
which.is.a.kind.of.3D.disc.and.it.is.make.up.
of two frames, the player will playback this
disc.and.export.the.content.based.on.the.
TV's settings. So if you want to do some
settings, such as OSC or program, please
ensure that the 3D TV's setting is correct.
Note: If you do some 3D TV's setting during 3D
disc playback, the TV screen may be abnormal.
To recover, load the 3D TV's default setting
first.
[Video Process]
... Display Setting...
TV Video Adjust
Video Process Sharpness
Motion Vide...
Move cursor key to select menu option
then use "OK" key to select
More...
Low
SETUP Exit