Hdmi Settings; Digital Audio Output - Toshiba 40WL753B Owner's Manual

HDMI Settings

Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the Enable Content Type and
INSTAPORT™ options to Off. Adjusting these settings should
allow your early HDMI source to operate properly with your
television.
a
In the PREFERENCES menu, press
Connection is highlighted, and then press
b
b
Press to highlight HDMI Settings and press
NOTE: HDMI Settings is grayed out on non-HDMI
inputs.
c
B b
Press or to select an item, and then press
to select a setting.
HDMI Settings
Enable Content Type
INSTAPORT TM
RGB Range
• Enable Content Type: On
This feature is part of the HDMI1.4 standard.
When set to On, the TV will automatically adjust
settings according to the content type data sent from
the connected HDMI device.
• INSTAPORT™: On
This feature reduces the lag time when switching
HDMI sources.
• RGB Range: Auto
This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.
NOTE:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
• All of the above HDMI settings need proper HDMI source
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
When connecting a surround sound amplifier to the digital
PCM: this mode outputs PCM format to the digital audio output
b
until AV
Auto: this mode outputs Dolby Digital (if available) or PCM to
Q
.
Q
.
a
C c
or
On
On
Auto
b
65
CONTROLS AND FEATURES

Digital Audio Output

audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
socket.
the digital audio output socket.
S
Dolby Digital Dolby Digital
S
Dolby Digital Plus Dolby Digital
S
MPEG PCM
S
HE-AAC Dolby Digital
In the AV Connection menu, press
Audio Output.
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
EXT 2 Input
Woofer
Digital Audio Output
C c
Use or to select PCM or Auto.
b
to select Digital
HDMI 3
Auto
AV
Internal
Auto