System Information And Reset Tv; System Information; Reset Tv; Pc Settings - Toshiba 40WL753B Owner's Manual

System Information and

Reset TV

System Information

This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
From the SETUP menu, press
Information.
b
Q
Press to display the System Information.
System Information
2.1.26.0 Feb 19 2010 - 15:56:50 FW:13
WEAK
Ch22
Ch25
Ch35
Ch46
c
For information about the signal quality of a particular
B
multiplex, press or
d
Q
Press for a screen showing detailed technical
information about the selected multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a
In the SETUP menu, press
highlighted.
b
Q
Press to select. A screen will appear warning that
all settings will be lost. Press
When the set powers back on, the Quick Setup screen
Q
will appear. Press
perform an auto tune. (See 'Quick Setup' section on
page 15.)
B b
or to select System
TOSHIBA
2010
AVERAGE STRONG
Poor
Good
Good
Good
b
to select that multiplex.
b
until Reset TV is
Q
to continue.
to advance the setup and

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the 'Connecting a computer'
section) and ensure that a picture is showing on the television
screen. The picture position may now be adjusted to suit
personal preference.
a
In the PREFERENCES menu, highlight Display
Settings and press
b
In the Display Settings menu, press
Settings is highlighted.
Display Settings
Auto Format
4:3 Stretch
PC Settings
c
Q
Press . Press
c
or to adjust the settings.
PC Settings
Horizontal Position
Vertical Position

Clock Phase

Sampling Clock
The Clock Phase matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
a
In the Display Settings menu, press
Settings is highlighted.
b
Q
Press to select, and then
Phase.
c
C c
Use or to adjust until the picture clears.
61
CONTROLS AND FEATURES
Q
.
b
until PC
On
Off
B b
and to select an option, then
0
0
0
0
Reset
Clock Phase
b
until PC
b
to highlight Clock
C