Dynamic Range Control; Audio Level Offset; Headphone Settings; Audio Description - Toshiba 32SL863B Owner's Manual

Dynamic Range Control

This feature allows control of audio compression for some digital
TV programmes (MPEG-1 and MPEG-2 audio programmes are
not supported).
a
In the Sound menu, press
Range Control.
b
C c
Press or to select On or Off.
NOTE: This feature is disabled when Dolby Volume is set to
Low or High.

Audio Level Offset

Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an
external input. Using the Audio Level Offset feature reduces
these volume differences.
a
Set the volume level usually used when watching a
DTV 5.1ch programme.
b
Tune to a channel which is DTV 2ch, ATV or an
external input.
c
In the Sound menu, press
Level Offset and press OK.
d
B b
Press or to select an option, and then use
to adjust the volume level.
Audio Level Offset
DTV 2ch
ATV
External Input
NOTE:
• The available item changes depending on the current input
source. For example, while watching a DTV 2ch programme,
only DTV 2ch is available and the other two items are
greyed out in the menu. This allows you to easily adjust
according to each condition.
• When watching a DTV 5.1ch programme, this feature is not
available.
B b
or to select Dynamic
B b
or to select Audio
C c
or
-5
0
0
31

Headphone Settings

This setting is used to set the sound output when headphones are
connected.
Speaker
Headphone
Link
On Sound is output
2
( – + is available.)
Off Sound is output
(Headphone level
menu is available.)
a
In the Sound menu, press
Headphone Settings and press OK.
b
B b
Press or to select Speaker Link and use
to select On or Off.
c
If you select Off, then highlight Headphone Level
C c
and use or to adjust the headphone sound.
Headphone Settings
Speaker Link
Headphone Level

Audio Description

Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the story
line more fully. The letters AD will be displayed in the channel
banner when programmes contain AD content.
a
In the Sound menu, select Audio Description and
press OK.
b
B b
Press or to select Audio Description, and then
C c
press or to select On.
Audio Description
Audio Description
Mixing Level
The AD button on the Remote can also be used to
toggle the Audio Description feature between On
and Off.
c
To adjust the level of the audio description sound to
the main sound, highlight Mixing Level and use
c
.
CONTROLS AND FEATURES
Speakers
No sound
Sound is output
2
( – + is available.)
B b
or to select
C c
or
Off
50
On
50
C
or