Using The Usb Hdd Function (For Ul86 Series); To Record Dtv Programmes (One Touch Recording); To Schedule Programmed Recording - Toshiba 32SL863B Owner's Manual

Using the USB HDD Function
(for UL86 series)
The USB HDD function can be used to record and
view digital broadcast programmes. Read the
precautions below before recording or viewing
programmes using the USB HDD function.
NOTE:
• Recorded programs saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.
• You cannot watch one channel while recording another.
• If the recording time to the USB HDD is too short, no data
may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording starts.
Also, leaving the power switch "ON" until recording is
scheduled to start, may cause the recording to fail.
• Should video or audio recording fail due to malfunction of
the TV or poor reception, no compensation shall be paid.
• You can reserve up to a total of 64 programs for recording
and viewing.
• If there is a power failure or the power plug is disconnected
during programmed recording, recording will stop and will
not resume when the power returns or the plug is
reconnected.
• Do not disconnect the power plug when the indicator lamp
is lit.
• Any changes implemented by the broadcasting station may
aff ect program scheduling.
• Scheduling of multiple consecutive programs will result in
the beginning of each program not being recorded.
• When the "Programme Tracking" for programmed
recording is set to "On" and the broadcast time of the
scheduled program overlaps with the start time of timer
viewing due to delay, extension, or other causes, timer
viewing will be cancelled.
• Depending on the situation at the time, not all items can be
set or changed. ("X" indicates no setting.)
• Programmed recording cannot take place if the power plug
is not connected.
• Disconnecting the power plug during recording may result
in failure to save the recorded program.
• Changing the USB 2 Port Setup to Media Player will
invalidate all previously made programmed recordings.
(see page XX)
To record DTV programmes (One Touch
You can easily record the programme currently being viewed.
a
Press the ● REC button on the remote control.
Recording for the currently viewing programmes will
start.
The RED LED will be lit.
Pressing the ● REC button once more will display the
screen for setting the recording time. Press
select the desired recording time and press OK.
To stop recording
a
v
Press the (stop) button.
A confi rmation window "Do you want to stop
Recording" will appear.
b
C c
Press or to select Yes and press OK.
Recording will stop.

To schedule programmed recording

Programmed recording can be scheduled easily using the
Programme Guide or by specifying the date and time.
PLEASE NOTE:
When a timed programme is about to start, an information
screen will appear off ering the option of watching or
cancelling the programme. The menus and other channels
will not be available during the timed programme unless the
programme timer is cancelled. The programme timer you set
is not performed when the TV is turned off with the POWER
switch.
It will only be possible to create or edit programme timers for
the currently tuned DTV input.
To schedule programmed recording using the
Programme Guide
a
Press the GUIDE button on the remote control (or
select TV Programmes/Guide menu from the menu
system) to display the EPG screen.
b
B b C c
Press
to record.
49
CONTROLS AND FEATURES
Recording)
to highlight the programme you want
C c
or to