Connecting The Lp Tank - Westinghouse WBGLGBGO12AR User Manual

compatible with the appliance nesting hole and retention means. Refer to Page 10-11 of
the Assembly Instructions for correct cylinder to cylinder holder connection.
Warnings
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT
FIRE, DAMAGE AND/OR INJURY.

CONNECTING THE LP TANK

1. The knob on the LP tank must be closed. Make sure that the knob is turned
clockwise to a full stop. The cylinder supply system must be arranged for vapor
withdrawal.
2. Check that the control knob on the control unit is turned off
3. Remove the protective cap from the LP tank valve and coupling nut.
4. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the
nipple is centered in the valve outlet. The coupling nut connects to the large outside
threads on the valve outlet. Use care do not cross thread the connection.
5. Hand-tighten the coupling nut
tighten by hand only. Do not use tools. To Disconnect: Fully close the tank valve
by turning clockwise. Turn the coupling nut
regulator assembly detaches.
Warnings
In the connection process, make sure:
• The regulator inlet connector mates with the cylinder valve out let properly,safely
and firmly.
• The LP gas hose does not come in contact or remain in contact with the grill main
body.
clockwise until it comes to a full stop. Firmly
counterclockwise until the
17
EN