Cleaning Paper Feed Rollers - Canon PIXMA TR4700 Series Online Manual

Cleaning Paper Feed Rollers

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this
case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when
necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the
market
1. 1.
Check that printer is turned on.
2. Remove any paper from the front tray. 2.
3. 3. Press the Setup button, use the
button.
LCD and Operation Panel
4. 4. Clean the paper feed rollers without paper.
button to select Roller Cleaning and press OK button.
Use
The paper feed roller will rotate as it is cleaned without paper.
5. 5. Clean the paper feed rollers with paper.
1. 1. Make sure that the paper feed rollers have stopped rotating, then load a sheet of A4 or
Letter-sized plain paper or cleaning sheet available on the market in front tray.
Loading Plain Paper
2. 2. Press the OK button.
The printer starts cleaning. The cleaning will be complete when the paper is ejected.
If the problem is not resolved after cleaning the paper feed roller, contact your nearest Canon service center
to request a repair.
button to select Maintenance, and press the OK
109