Canon PIXMA TR4720 Online Manual page 423

Hide thumbs Also See for PIXMA TR4720:
Table of Contents

Advertisement

Proceed once you complete checking the power status above.
Check PC network connection.
Check2
If your computer and network devices (wireless router, etc.) are fully configured, your computer is ready to
connect to the network.
1. Check the settings of the network device (wireless router, etc.).
1.
Connect to the Internet and see if you can browse any web page. If you cannot view web pages on
your computer, check wireless router network connection settings, such as IP address filtering, MAC
address filtering, and DHCP function.
To check the network name (SSID) of the wireless router the printer is connected to, print the network
settings.
Printing Network Settings
Note
• Depending on the wireless router, note that different network name (SSID) is assigned for a
bandwidth (2.4 GHz or 5 GHz) or its usage (for PC or game machine), using alphanumeric
characters at the end of network name (SSID).
• For more on checking the settings of the wireless router, refer to the instruction manual
supplied with the wireless router or contact the manufacturer.
If you use an encryption key, specify it for the network name (SSID) you are using. For details, see
Setting an Encryption
2. Check PC network connection.
2.
For the procedures, refer to the instruction manual supplied with the computer, or contact the
manufacturer.
Once you complete setting up the wireless router and your computer, configure the settings on your computer in
order to view web pages, using the information of the wireless router.
Proceed once you complete checking the network connection above.
Check printer's Wi-Fi settings.
Check3
icon is displayed on the LCD when Setup button is pressed.
Make sure
Note
• When you press the Setup button, the icon is displayed only for a short time.
Press the Setup button to display the icon again.
If
or
icon is not displayed:
The printer is not set to use Wi-Fi.
From the Setup menu screen, select Device settings > LAN settings > Wi-Fi > Wi-Fi enab./disable in this
order and select Enable.
Key.
423

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma tr4700 series

Table of Contents