Table of Contents
Advertisement
Note
• This setting may not be available depending on the country or region of purchase.
•
• Tel. line auto select (China only)
•
If you select ON, the telephone line type is selected automatically.
If you select OFF, you can select the telephone line type manually.
Setting Telephone Line Type
Adv. fax settings
• Err reduction (VoIP)
•
If you select Reduce, it may be possible to reduce the incidence of communication errors when
connecting to internet line such as IP phone.
Note
•
• When Reduce is selected, V.34 (Super G3) cannot be used. Communication time generally
becomes longer than when communicating with V.34 (super G3).
•
• This setting has priority even if you select 33600 bps for TX start speed or RX start speed.
• Auto redial
•
Enables/disables automatic redialing.
If you select ON, you can specify the maximum number of redial attempts and the length of time the
printer waits between redial attempts.
•
• Dial tone detect
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON, the printer transmits the fax after confirming the dial tone.
Note
•
• This setting may not be available depending on the country or region of purchase.
•
• Pause time settings
Sets the length of pause time for each when you enter "P" (pause).
• TTI position
•
Selects the position of the sender information (outside or inside the image area).
• Remote RX
•
Enables/disables remote reception.
If you select ON, you can specify the remote reception ID.
Remote Reception
185
Advertisement
Table of Contents
