Update Scan; Single Rf Scan; Favorite Network Select - Toshiba 19SL738B Owner's Manual

TUNING THE TELEVISION
Auto Scan
Scan All Channels.
Scan Mode
Start Frequency (KHz)
End Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Network ID
Scan
NOTE: The options Start Frequency, End
Frequency, Modulation, Symbol Rate, and
Network ID is available for Advance mode only.
Press ▲ or ▼ to highlight Scan and press
► or to start scanning. Press RETURN
to cancel, or press EXIT to stop scanning.

Update Scan

Search the new channels that are not in the
programme list.
Press MENU and press ◄ or ► to select
SETUP.
Press ▼ to highlight Channels and press
► or .
Select Update Scan and press
scanning.
Update Scan
Status: Scanning..
Digital Channels: 0
NOTE: This option is available for DVB_T only.
0%
Advance
362000
362000
Auto
6900
100
Select Exit
EXIT
to start
Analogue Channels: 0
0%
Cancel Exit
RETURN EXIT

Single RF Scan

Scan single RF channels. You can check the
Signal Strength and the Signal Quality.
Select Channels from the SETUP menu.
Highlight Single RF Scan and press ► or
to enter.
Press ◄ and ► to select the RF Channel,
then press
Single RF Scan
Scan single RF channel. (Digital Only)
Start Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Signal Strength
NOTE: This option is available for DVB_C and
DVB_T only.

Favorite Network Select

If there are more than two networks detected
after running the Auto Scan in Channels menu,
you can select the network you prefer.
Select Channels from the SETUP menu.
Highlight Favorite Network Select and
press ► or
Auto Scan
Update Scan
Single RF Scan
Favorite Network Select
Channel Skip
Channel Sort
Channel Edit
Clean Channel List
Enter
OK
22
to start scanning.
0%
474000
Auto
6875
Scan Back
OK RETURN EXIT
to enter.
Channels
Select Back
RETURN EXIT
0
Exit
Exit