Contents Safety Precautions ... 2 Air Circulation ... 2 Heat Damage... 2 Mains Supply ... 2 Warning ... 2 Do ... 2 Do not ... 2 Installation and Important Information ... 3 Exclusion Clause ... 3 Digital Switchover ... 4 Inserting Batteries and Effective Range of the Remote Control...
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profi t, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
Digital Switchover Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see above to fi nd out when your area switches to digital.
Simple at-a-glance reference of your remote control. Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types.
Connecting External Equipment Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the wall socket. Aerial cable... Connect the aerial to the socket on the rear of the television. SCART lead... If you use a decoder* or a media recorder, it is essential that the scart cable is connected to the television.
Connecting an HDMI® or DVI Device to the HDMI The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or...
Connecting a Computer To Connect a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. When connecting a PC to the RGB/PC terminal on thetelevision, use an analogue RGB (15-pin) computer cable anda PC audio cable for the AUDIO socket.
Please always refer to the owner’s manual of the equipment to be connected for full details. NOTE: The USB socket has limited functionality, and Toshiba can take no responsibility for damage to other connected equipment.
Initial Installation - Digital & Analogue Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4. Connect the mains plug and switch the TV into standby using the side On/Off switch.
Auto Tuning The television can be tuned-in manually using Manual Tuning feature. • Select your Country, Language and Text language by using the navigation buttons. Press OK or RED button to continue. To cancel, press BLUE button. The following menu will be displayed during the automatic tuning: •...
Analogue APS and Programme Sorting Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the APS (Automatic Programming System) When the APS feature is selected all channels and settings will be lost, the television will return to factory settings and then re-tune.
Stereo and Bilingual Transmissions and Channel Stereo and Bilingual Transmissions For ATV programmes If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.
Renaming a Channel and Programme Locking Renaming a Channel • Select the channel that you want to rename and select Edit Name option. Press OK button to continue. • Pressing Left or Right button moves to the previous/next character. Pressing Up or Down button changes the current character.
Programme Searching, Displaying Subtitles and Language Settings Programme Searching From the guide screen, you can use search feature. • Press “0” button on the remote control to view Guide Search menu. Using this feature, you can search the programme guide database in accordance with the genre selected or with name match.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. Viewing Parental Control Menu • While in DTV mode, press MENU to view main menu. Select Setup from the list and press OK button. •...
Digital Settings - Confi guration You can confi gure DTV settings of your TV by using digital Confi guration menu. Viewing Confi guration Menu You can confi gure the settings of your TV. Select Confi guration from Setup menu and press OK to view this menu. Press the BACK button on the remote control to exit.
Digital Settings Confi guration continued Audio Description (optional) Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary).
Analogue Sound Controls Controlling Volume and Muting Sound Volume Press V+ or V- to adjust the volume. Sound Mute Press “ ” once to turn the sound off and again to cancel. Equalizer Settings You can customize current sound mode settings. Select the appropriate mode in accordance with the installation location of the TV and adjust the equalizer on-screen as desired.
Most of the picture controls and functions are available in both digital and analogue modes. Picture Mode This television offers the choice of personalising the picture style. Cinema, Dynamic and Natural are preset options and affect settings within the television. •...
Changing Picture Format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the SCREEN button repeatedly to select between Auto, 16:9, 4:3, Subtitle, 14:9, 14:9 Zoom, Panaromic or Cinema. When Auto is selected the format being displayed is determined by the picture being broadcast. 00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 21 00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 21 English - 21 -...
Your television has a list of other controls that function in accordance with your preferences. Child Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. • In the FEATURE menu, select Child Lock and choose On or Off using Left or Right button.
Timers - Digital and Analogue, Conditional Programme Timers - Digital Only This feature will set the television to go to a specifi c channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes.
USB Media Browser This TV allows you to enjoy photo or music fi les stored on a USB device. Auto Start • When you plug a USB device, the following screen will be displayed: • Select YES by pressing Left or Right button and press OK button.
USB Media Browser, Slideshow Feature You can use this feature to display photos on your TV. • Press YELLOW button to pause a playing fi le. • Press GREEN button to continue with the slideshow. • Press Left or Right button to jump to previous or next fi le of slideshow.
PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV mode menus. Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
• For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer. Below is a guide to the functions of the remote control text buttons. Acessing Sub-Pages If a text page has sub-pages, press and enter the sub- page numbers 01,02,03 etc.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1600 X 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source EXT-1 (SCART) YPbPr HDMI Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.
License Information HDMI, the HDMI logo, and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. DVB is a registered trademark of the DVB Project. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-defi...
Questions Below are the answers to some of the most common queries. For more information, go to www.toshiba.co.uk Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections.
Page 35
Why doesn't the remote control work? Check the batteries aren't dead or inserted incorrectly. Why doesn't the remote control work? Check the batteries aren't dead or inserted incorrectly. Why doesn't the Media Browser feature operate? Make sure that USB is connected correctly. Incorrect behavior may occur with a USB Hub connection.
Need help?
Do you have a question about the 19BV500B and is the answer not in the manual?
Questions and answers