Labeling Video Input Sources; Digital Audio Output - Toshiba 42VL963B Owner's Manual

Labeling video input sources

These input labels are shown in the input selector. You can label
video inputs according to the devices you have connected to the
a
C c
Press MENU / to highlight Setup icon.
b
B C c
Press / to highlight Preferences icon and
press OK.
c
B b
Press or to select AV Connection.
Preferences
REGZA-LINK Setup
Network Setup
Guide Type
Network Device Setup
Teletext
Network Lock
Panel Lock
AV Connection
d
Press OK to display the AV Connection menu.
e
B b
Press or to highlight Input Labeling and press
OK.
AV Connection
Input Labeling

Digital Audio Output

f
B b
Press or to select Input Labeling and press OK.
Input Labeling
Input
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
g
B b
Press or to select the item you want to label, and
C c
then press or to select --, Amplifier, Cable, DVD,
Game, PC, Recorder or Satellite.
h
Repeat step 7 for other video inputs.
TV.
Auto
Off
Off
Label
--
--
--
--
--
--
--
Digital Audio Output
When connecting a surround sound amplifier to the digital audio
output (Sony/Philips Digital Interface Format [S/PDIF]), the
following options can be selected or adjusted.
a
In the Preferences menu, press
Connection and press OK.
b
B b
Press or to select Digital Audio Output.
AV Connection
Input Labeling
Digital Audio Output
c
Press OK to display Digital Audio Output menu and
B b
press or to select an option.
Audio Format:
C c
Press or to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if available)
or PCM to the digital audio output socket.
Dolby Digital
Dolby Digital Plus
S
MPEG
HE-AAC
Audio Delay:
C c
Press or to select Auto or Manual.
Auto: This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment:
C c
Press or to adjust the audio signal timing
(0 – 250ms) to meet the video signal timing.
NOTE:
• This feature is grayed out when Audio Delay is in Auto.
• A time lag will occur when the video signal or audio
signal is changed. Adjust the timing accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.
• Depending on the connected equipment (amplifier,
etc.), adjustment may not be possible.
• When the optical digital output setting (Auto
is changed, it may be necessary to adjust the timing
again.
• Do not use other than for audio output from the AV
amplifier, etc. (Malfunction may occur)
75
CONTROLS AND FEATURES
B b
or to select AV
S
Dolby Digital
S
Dolby Digital
PCM
S
Dolby Digital
t
PCM)