Ant/Cable/Satellite (If Available) - Toshiba 42VL963B Owner's Manual

T
Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. For further
information, visit www.Toshiba-om.net.
Satellite Settings
Switch Type
LNB Power
No. Satellite
ASTRA 19.2˚E
1
2
3
4
Transponder: 1/85 (10729 MHz)
Dish Type: Fixed
Lower LOF: 9750
Upper LOF: 10600
Highlight Done and press OK.
u
If your satellite dish is movable, the following
Positioning screen will appear.
Positioning
Satellite : ASTRA 19.2°E
Transponder
Go to 0
Go to Stored Position
Step Size
Positioning
Signal Level
B b
Press or to highlight Positioning, and then press
C c
or to find the dish position with the strongest
signal level.
B b
Press or to highlight Store Position and press
OK to store the dish position. Repeat steps 20 and 21
for the next satellite as necessary.
If your satellite dish is not movable, the Positioning
screen will not appear.
Adjust the dish position manually for the maximum
Signal Level strength.
Highlight Done and press OK.
None
On
Dish LNB
1 1
Done
1/83 (10743 MHz H)
1
W E
Store Position
v
If the reception testing completes successfully, the
Auto Tuning startup screen will display.
Auto Tuning - Satellite
Satellite
Search Option
You can select Search Option between Free to Air
and All.
w
B
Press
OK.
The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the Auto Tuning results
screen will display the total number of services found.
x
B
Use or
channel, and then press OK to view.
PLEASE NOTE
The Quick Setup menu can also be accessed at any
time from the Setup / System Setup menu.

Ant/Cable/Satellite (if available)

From this menu, you can set the RF input configuration.
30%
a
Press MENU /
b
B
Press
press OK.
c
b
Press
c
to select Antenna, Cable or Satellite.
NOTE: When you attempt to change the Ant/Cable/
Satellite setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.
19
SETTING UP YOUR TV
Start Scan
ASTRA 19.2°E
Free to Air
b
or to highlight Start Scan, and then press
b
to move through the list to select a
C c
to highlight Setup icon.
C c
/ to highlight System Setup icon and
to select Ant/Cable/Satellite and press
C
or