Operation - ABSINA 301001 User Manual

FUNCTIONS OVERWIEV
• Charger for 1-4 AAA or 1-4 AA or 1-2 9V rech. batteries (NiMH/
NiCd)
• Automatic start of charging after insertion of the rech.
battery
• Individually slot controlled (separate charging for each rech.
battery)
• Automatic start of a repair mode when deeply discharged
rech. batteries are detected + gentle precharging with
reduced current
• Double overload protection through voltage monitoring (-dV)
and safety timer
• Microcontroller-monitored charge control
• Automatic switchover to trickle charge when the rech.
battery is fully charged
Deutsch .
•
•
•
•

OPERATION

1.
2.
3.
English
. Français . Español . Italiano
Battery defect detection
Display of the charging status by multicoloured LEDs per
charging bay
Mechanical reverse polarity protection
Worldwide use (100V-240V AC / 50-60Hz)
Plug the device into a suitable power outlet (100-240V AC
50-60Hz).
The device carries out a short self-test in which all control
LEDs for the round cells flash 3x in orange.
You can insert up to 4x NiMH or NiCd batteries of the sizes
Mignon AA or Micro AAA or 2x 9V batteries (also mixed).