DFI ED700-EHL22I User Manual page 9

Fanless embedded system
Hide thumbs Also See for ED700-EHL22I:
Table of Contents

Advertisement

TOP I/O
USB
Antenna Hole
SIM slot
FRONT I/O
Ethernet
Serial
USB
Display
DIO
Antenna Hole
WATCHDOG TIMER
Output & Interval
SECURITY
TPM
POWER
Type
RTC Battery
Connector
OS SUPPORT
Microsoft
Linux
ENVIRONMENT
Operating Temperature
Storage Temperature
Relative Humidity
MECHANICAL
Construction
Mounting
Dimensions (W x H x D)
Weight
STANDARDS AND
Shock
CERTIFICATIONS
Vibration
Certifciation
User's Manual | ED700-EHL22I
2 x USB 2.0
4 x antenna opening for 4G/5G/GPS
Dual SIM
2 or 3 x GbE (RJ-45) (configuration options)
1 x 2.5GbE TSN RJ45
1 x Allxon OOB Enabler (by request)
2 x RS232/422/485
2 x Isolated COM and 1x 6bit DI & 1x 6bit DO
2 or 4 x USB 3.1 (configuration options)
1 x VGA
8-bit DIO (jumper switch to COM)
12-bit isolated DIO
2 x antenna opening for WiFi
System reset, programmable via software from 1 to 255 seconds
TPM 2.0 (configuration options)
Wide range 9~36V
RTC battery CR2032
3-pole terminal block 2-pin power extension switch onnector
Windows 10 IoT Enterprise 64 Bit
Ubuntu 20.04
0 to 60°C
-40 to 60°C (Supported by Intel
Embedded Series )
®
-40 to 85°C
10 to 90% RH (non-condensing)
Aluminum + Metal
Wall/DIN rail mount
72 x 172 x 118.2 (mm)
1.6 kg
Operating: 3G, 11ms
Non-Operating: 5G, 11ms
Operating: Random 5~500Hz, IEC68-2-64 (3G)
Non-Operating: Sine 10~500Hz, IEC68-2-6 (3G)
CE, FCC, RoHS
Chapter 1
INTRODUCTION
9

Advertisement

Table of Contents
loading

Table of Contents