Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spiral Bevel Gear 37, Ball Bearing 6201DDW
DISASSEMBLING
(2) Disassemble Spindle as illustrated in Fig. 7.
Fig. 7
3. Put Bearing box on 1R217,
then put 1R026 over the
stepped portion of Spindle.
1R026
Spindle
Spiral bevel
gear 37
Bearing box
1R217
(3) Disassemble Ball bearing 6201DDW from Gear housing complete. (Fig. 8)
Fig. 8
6. Remove Retaining ring R-32 with 1R005.
Retaining
ring R-32
4. Push Spindle out a little by striking 1R026
carefully using arbor press with a down stroke
of approx.10mm long. Then remove 1R026.
approx.
10 mm
Note:
Do not reuse removed Ball bearing 6201DDW
because it is damaged in this step.
7. Remove Ball bearing 6201DDW from
Bearing box.
In this step, Flat washer 12 is removed.
1R005
5. Put 1R281 on Spindle.
Then, using arbor press,
press 1R281 to remove
Spindle from Spiral bevel
gear 37.
Flat washer 12
Ball bearing
6201DDW
P 5/ 13
1R281
Spindle
Advertisement
