Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[[3]-1. Armature, Spiral Bevel Gear 13, Ball Bearing 629ZZ, Ball Bearing 607ZZ
DISASSEMBLING
(2) Remove Spiral bevel gear 13, Ball bearings from Armature. (Fig. 3)
Fig. 3
4. Disassemble Armature from
Gear housing complete.
Armature
6. Using 1R269, remove Ball bearing 629ZZ and Flat washer 9 from the Fan side, then Ball bearing 607ZZ
from Commutator end.
Ball bearing
629ZZ
ASSEMBLING
Do the reverse of the disassembling steps.
Note in Assembling:
When Motor housing and Gear housing complete are joined together,
Spindle must be positioned on the opposite side of Switch knob. (Fig. 4)
Fig. 4
Motor housing
Gear housing
complete
5. Disassemble Spiral bevel gear 13 from Armature by removing
M6 Hex nut with Wrench 10.
M6 Hex nut
[Correct]
Switch knob
Spindle
Wrench 10
Ball bearing
629ZZ
Flat washer 9
Ball bearing
Ball bearing
607ZZ
[Wrong]
M6 Hex nut
Spiral bevel gear 13
607ZZ
Switch knob
Spindle
P 3/ 13
Advertisement
