Cannot Find Printer While Using Wireless Lan - Canon PIXMA MG3022 Online Manual

Cannot Find Printer while Using Wireless LAN

Note
• This section describes the troubleshooting when using the computer.
For the troubleshooting when using the smartphone or the tablet:
Cannot Print/Scan from Smartphone/Tablet
Check the power status of printer and other devices (wireless router, PC,
Check1
smartphone, or tablet).
Turn on the printer or devices.
If the power is already turned on, turn it off and on again.
Make sure Wi-Fi lamp is lit on operation panel.
Check2
If the Wi-Fi lamp is off, the wireless LAN is disabled. Follow the procedure below to enable the wireless LAN.
1. Press and hold Wi-Fi button and release it when Wi-Fi lamp flashes.
2. Press Black button.
3. Press the Wi-Fi button repeatedly until the Network lamp lights.
4. Press Color button or Black button to finalize selection.
Make sure printer setup is complete.
Check3
If it is not, perform setup.
• For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
• For Mac OS:
Follow the instructions on the Canon website.
If you can use IJ Network Device Setup Utility, look for printer again. (Windows)
Check4
IJ Network Device Setup Utility Screen
Make sure printer and wireless router network settings match.
Check5
Make sure the network settings of the printer (e.g. wireless router name, SSID, network key, etc.) are identical
with those of the wireless router.
To check the settings of the wireless router, refer to the instruction manual provided with it or contact its
manufacturer.
268