Using Printer With Wireless Direct - Canon PIXMA MG3022 Online Manual

Using Printer with Wireless Direct

You can connect devices (e.g. smartphone or tablet) to the printer by two methods below.
• Wireless connection (connecting devices via a wireless router)
• Direct wireless connection (connecting devices using wireless direct)
This section describes wireless direct, which allows you to print by connecting the devices to the printer
directly.
Follow the procedure below to use wireless direct.
1. Enable wireless direct.
2. Connect devices to printer.
3. Perform printing operation.
This section also describes changing wireless direct to wireless LAN.
Changing Printer Setting to Use Wireless LAN
Important
• You can connect up to 5 devices to the printer at the same time.
• Check the usage restrictions and switch the printer to the wireless direct.
Restrictions
Preparing for Wireless Direct
Change settings below to prepare for wireless direct.
• Printer's LAN settings
Changing Printer's Settings
• Settings of a device to connect
Changing Settings of a Device and Connecting It to the Printer
Changing Printer's Settings
1. Make sure printer is turned on.
2. Press and hold the Wi-Fi button and release it when the Wi-Fi lamp flashes.
3. Press the Black button.
The ON lamp flashes and the Wi-Fi lamp lights.
4. Press the Wi-Fi button repeatedly until the Direct lamp lights.
When the lamps light as below, wireless direct is enabled.
193