Biostar X570GT8 User Manual page 15

NX Mode
This item enables or disables No-execute page protection Function.
Options: Enabled (Default) / Disabled
SVM Mode
This item enables or disables CPU Virtualization.
Options: Enabled (Default) / Disabled
CPB Mode
This item specifies the method of core performance boost enablement.
Options: Enabled (Default) / Disabled
Global C-state Control
This item allows you to controls IO based C-state generation and DF C-states.
Options: Auto (Default) / Enabled / Disabled
Power Supply Idle Control
This item enables or disables C6.
Options: Auto (Default) / Low Current Idle / Typical Current Idle
SMT Mode
This item enables or disables Simultaneous multithreading. WARNING - S3 is NOT SUPPORTED on
systems where SMT is disabled.
Options: Auto (Default) / Disabled
PCI Subsystem Settings
PCI Latency Timer
This item value to be programmed into PCI Latency Timer Register.
Options: 32 PCI Bus Clocks (Default) / 64 PCI Bus Clocks / 96 PCI Bus Clocks / 128 PCI Bus Clocks /
160 PCI Bus Clocks / 192 PCI Bus Clocks / 224 PCI Bus Clocks / 248 PCI Bus Clocks
X570GT8
2. Advanced Menu | 15