Product Operation - Pelonis PSH17PF2HDB Owner's Manual

PRODUCT OPERATION

Check Before Turning On The Machine
• Check if the power wire is under good condition.
• The product requires a 120V 60Hz AC power supply, before use, please confirm if
the rated current of the power socket meets the local requirements with safe
grounding device, otherwise, please replace it with the qualified socket.
Put The Machine On The Flat Place
Uneven place may possibly cause the turnover switch at abnormal position, then the
•
heater can't work after turning on, therefore, please put the heater on the flat place,
at least the surface below the base of the heater must be flat.
Temperature Control Knob
Insert the plug into the power socket, then turn the Temperature Control knob
•
clockwise, when hearing the "poop" sound (it means the temperature controller is
on), adjust the Temperature Control knob to the desired temperature level.
Power Switch Knob
Turn the Power selection knob to select between 3 functions: Fan only, Low 750W
•
(LOW), High 1500W(HIGH).
Turn off the Heater
• Turn the Power Switch Knob to OFF position.
• Turn the Temperature Control knob anticlockwise to the initial position.
Remove the power plug, store the heater after the entire machine has become cool.
•
Safety Protection
• Overheat protection: When the temperature in the heater is too high due to
abnormality in the use environment or improper use, the thermostat device can
automatically cut off the power and the heater stops working. After the whole
heater is cooling, the heater can return to the normal use after removing the
abnormality.
Inversion protection: When the whole heater is inverted, the safety system will
•
automatically cut off the power, and return to the work state before inversion after
the body is placed upright.
Additional Features
This heater has additional features:
• Check if the power wire is under good condition.
08