V-Belt Adjustment; Machine Care; Cables - RIDGID Kollmann K-1500G Operator's Manual

Drain cleaning machine

Table of Contents

Available languages

V-Belt Adjustment

Check the V-Belt periodically for loosening. V-Belt should

not be too tight or excessive wear will occur.

1. Tighten V-Belt, remove guard 23547.

2. Turn Belt-Tension Hex Nuts 43827 slowly clockwise,

until V-Belt stiffens.

NOTE! Proper tension is realized when V-Belt moves ap-

proximately

" under finger pressure.

Engine driven equipment must be kept indoors or well

covered in cold or rainy weather. If machine has been ex-

posed to freezing weather, unit must be run for ten or

twenty minutes without load to warm up. Failing to do this

will result in frozen bearings.

Store cable indoors, when not using, to protect from

the elements. Replace when old or worn.

K-1500G Drain Cleaning Machine

Ridge Tool Company • Elyria, Ohio • U.S.A.

Table of Contents

Table of Contents