How To Install Features; Shelves And Bins - GE GSS20GEWBB Owner's Manual & Installation Instructions

How to install features.

TOP FREEZER SHELF
Make sure the shelf front locks into
position.
Top Freezer Shelf
FREEZER DOOR SHELF FRONTS
Make sure that the shelf front locks
into position.
NOTE: On dispenser models, the
longer shelf fronts go in the top
two positions.
To remove: Lift the shelf extender
straight up, then pull out.
To replace: Engage the shelf extender
in the molded supports of the door
and push in. It will lock in place.
About the shelves and bins.
Rearranging the Shelves
Refrigerator Shelves:
To Remove
Lift up and out
4
(Not all features are on all models.)
FILTER CARTRIDGE
Remove Bypass Plug
Door
Shelf Front
Door
Shelf
LOWER FIXED DOOR BINS
Make sure the bin fronts lock into position.
Lower Door Bin
(Not all features are on all models.)
To Replace
Tilt up
Insert
top hook
Lower to
lock in
place
Install Filter Cartridge
Freezer Pan:
To Remove
Remove the pan by pulling it
forward, lifting up the front and
sliding it past the stop location.
DAIRY COVER
BOTTLE RETAINER
ADJUSTABLE
DOOR BINS
DOOR BIN SNUGGERS
To remove: Lift the front
of the bin up, then pull
out.
To replace or relocate:
Engage the bin in the
molded supports of the
door, and push in. Bin
will lock in place.
Freezer Shelves:
To Remove