Wash Cycles And Options; Table Of Wash Cycles; Wash Options - Ariston AQUALTIS AQD1070D 497 X Instructions For Installation And Use Manual

Wash cycles and options

Table of wash cycles

Icon Description of the wash cycle
Cotton Coloureds (2): lightly soiled whites and delicate colours.
Synthetics Resistant
Synthetics Resistant (3)
Whites
Coloureds
Darks
Steam Refresh
Wool Platinum Care: for wool, cashmere, etc.
Ultradelicates
Rinse
Spin and Pump out
Wash&Dry
Drying Cottons
Drying Wool
Drying Synthetics
Cotton + Prewash: extremely soiled whites and resistant colours.
Cotton Whites (1): heavily soiled whites and resistant colours.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle
2) Long wash cycle for cottons: set wash cycle
3) Long wash cycle for synthetics: set wash cycle

Wash options

! If the selected option is not compatible with the selected
wash cycle, this incompatibility will be signalled by the
flashing of the indicator light and a sound alert
(3 beeps); the option will not be activated.
! If the selected option is not compatible with another
option that has been selected previously, the indicator light
corresponding to the first option selected will flash and
only the second option will be activated; the indicator light
corresponding to the button will remain lit in a constant
manner.
Steam Hygiene
This option enhances washing performance by generating
steam during the wash cycle that eliminates any bacteria
from fibres while treating them at the same time. Place the
laundry in the drum, choose a compatible programme and
select option " ".
! The steam generated during washing machine operation
may cause the porthole door to become hazy.
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
with a temperature of 60°C.
with a temperature of 40°C.
with a temperature of 40°C.
Detergent and additives Max.
Max.
Max. temp.
speed Drying
(°C)
Prewash Wash
(rpm)
40° 1400

60° 800

40° 800 
60° 1400

40° 1400

30° 800 
- - -
40° 800 
30° 0 
- 1400 
- 1400

30° 1400

- -

- - 
- -

90° 1400 
60°
1400

(Max. 90°)
rotate slowly; the "Easy Iron" and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the "Easy Iron" button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level "Iron".
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
Cycle
load
Fabric
duration
(kg)
softener
- 10
 
- 5
 
-   5
- 6
 
- 6
 
-   6
- - - 2
-   2,5
-   1
- -  10
- - - 10
- 1
 
- - - 7
- - - 2,5
- - - 5
   10
- 10
 
EN
9 9