Handheld transmitter master development system (11 pages)
Summary of Contents for Linx OTX HH-LR8-MS Series
Page 1
MS Long-Range Handheld Transmitter Data Guide...
Page 2
ANSI and NFPA standards. It is solely the responsibility Labeling / Instruction Requirements of any Linx customer who uses one or more of these products to Typical Applications incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application.
Page 3
Series decoder, transmitter identity can Figure 2: With a one-time NRE and minimum be determined and button permissions order, Linx can configure the keypad and label established. The unit uses a single 3V areas to meet your specific requirements. CR2032 lithium button cell.
Page 4
Ordering Information Theory of Operation The OTX-***-HH-LR8-MS Long-Range Handheld Transmitter combines an Ordering Information LR Series transmitter and an antenna with an on-board MS Series encoder Part Number Description to form a simple, yet highly reliable RF remote-control transmitter. The LR OTX-***-HH-LR8-MS-xxx MS Long-Range Handheld Transmitter Series transmitter is a low-cost, high-performance synthesized ASK / OOK...
Page 5
Setting the Transmitter Address Contention Considerations The MS Long-Range Handheld It is important to understand that only one transmitter at a time can be Transmitter allows the selection activated within a reception area. While the transmitted signal consists of one of 16,777,216 (2 ) unique of encoded digital data, only one carrier of any particular frequency can addresses.
Page 6
Labeling / Instruction Requirements INSTRUCTION TO THE USER The transmitter has been pre-certified for FCC Part 15 and Industry Canada This device complies with Part 15 of the FCC Rules and Industry Canada license- license-exempt RSS standards for an intentional radiator. The 433.92MHz exempt RSS standard(s).
Page 7
LT Series transceiver module. The outstanding sensitivity of the LR Series receiver offers the best range when used with a Linx OEM transmitter. The receiver module is then connected directly to an MS Series decoder, which decodes the received signal.
Page 8
For technical support, product documentation, application notes, regulatory guidelines and software updates, visit www.linxtechnologies.com RF Design Services For customers who need help implementing Linx modules, Linx offers design services including board layout assistance, programming, certification advice and packaging design. For more complex RF solutions, Apex Wireless, a division of Linx Technologies, creates optimized designs with RF components and firmware selected for the customer’s application.
Page 9
TE Connectivity, TE, TE connectivity (logo), Linx and Linx Technologies are trademarks owned or licensed by the TE Connectivity Ltd. family of companies. All other logos, The limitations on Linx Technologies’ liability are applicable to any and all claims or theories of recovery asserted products and/or company names referred to herein might be trademarks of their respective owners.
Need help?
Do you have a question about the OTX HH-LR8-MS Series and is the answer not in the manual?
Questions and answers