Advertisement
Quick Links
Advertisement
Related Manuals for Linx DS Series
Summary of Contents for Linx DS Series
- Page 1 DS Keyfob Transmitter Data Guide...
- Page 2 ANSI and NFPA standards. It is solely the responsibility Assembly Diagram of any Linx customer who uses one or more of these products to Compliance Requirements incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application.
- Page 3 The configure the keypad and transmission can be decoded using an LR label areas. Contact Linx for or LT Series receiver paired with a DS Series details. decoder IC or microcontroller. The unit operates from a single 3V CR2032 lithium button cell.
- Page 4 Supply Current 12.6 Power-Down Current µA The transmitter is compatible with the Linx LR Series receiver and LT Series Transmitter Section transceiver modules. Ranges of up to 750 feet are possible when the Transmit Frequency Range transmitter is combined with the receiver and a good antenna. Applications...
- Page 5 AN-00300 describes in detail how to set the address to match any of the by gently prying apart the two halves of the Keyfob at receivers offered by Linx. This note can be found in the Support section of the seam (fingernails or a coin will do). Once the unit is the Linx website, www.linxtechnologies.com.
- Page 6 Labeling / Instruction Requirements INSTRUCTION TO THE USER The transmitter has been pre-certified for FCC Part 15 and Industry This device complies with Part 15 of the FCC Rules and Industry Canada license- Canada license-exempt RSS standards for an intentional radiator. The exempt RSS standard(s).
- Page 7 DATA RXM-xxx-LR Application Note AN-00300 discusses in detail how to set the addresses on all of the units. Data guides for all of the receivers and the DS Series decoder can be found on the Linx website, www.linxtechnologies.com. 100k 100k...
- Page 8 For technical support, product documentation, application notes, regulatory guidelines and software updates, visit www.linxtechnologies.com RF Design Services For customers who need help implementing Linx modules, Linx offers design services including board layout assistance, programming, certification advice and packaging design. For more complex RF solutions, Apex Wireless, a division of Linx Technologies, creates optimized designs with RF components and firmware selected for the customer’s application.
- Page 9 Under no circumstances shall any user be conveyed any license or right to the use or ownership of such items. ©2014 Linx Technologies. All rights reserved. The stylized Linx logo, Wireless Made Simple, WISE, CipherLinx and the stylized CL logo are trademarks of Linx Technologies.
Need help?
Do you have a question about the DS Series and is the answer not in the manual?
Questions and answers