Table of Contents
Advertisement
Z10000 Natural Gas Odorization System
1. Specifications
Power
Gas Pipeline Pressure
Odorant Blanket Pressure
Odorant Injection Rate:
Continuous*
Odorant Injection Rate:
Batch
Connections
User Interface Options
Data Logging
Enclosure
Options
Ambient Temperature
Shipping Weight
Hazardous Classification
Humidity
Altitude Range
*at injection rate of 0.5# odorant/mmscf
TechView is a freeware program from Emerson Process Management
†
configured by Sentry Equipment Corp for use with the Z10000 odorizer
Odorizer: Typical: 24 VDC, 1.12 A
Maximum: 24 VDC, 5.20 A
HMI: Typical: 24 VDC, 0.13 A
Maximum: 24 VDC, 0.39 A
0 to 1480 psi (102 bar) max
15 to 30 psig (1 to 2 bar)
.50–50 cc/min (.008–.793 gal/hr) at natural
gas flow rate of .107–10.7 mmscfh
for natural gas flow rates below 100,000 scfh
down to virtually zero flow
Myers Hub: (3) 3/4" NPT; (2) 1/2" NPT;
Odorant Outlet, Odorant Return,
Odorant Inlet: 1/4" comp
HMI via serial interface;
TechView
via Ethernet or Internet;
†
Serial RS-485 Modbus;
Open/TCP Modbus via cell modem
Hourly archives; Audit trail
Odorizer: 304 Stainless Steel
Wireless modem; battery pack; heater;
solar panel, odorant tanks and containments
Odorizer: 0˚F to 40˚F (-18˚C to 60°C);
heater assembly option available for
temperatures below 0°F (-18°C)
HMI: -40˚F to 122˚F (-40˚C to 50˚C)
Class I, Division 2, Groups C and D
Odorizer: 0–2000 ft
Specifications
HMI: Fiberglass
150 lb
Odorizer: 15–95%
HMI: 5–95%
HMI: 0–2000 ft
1
Advertisement
Table of Contents
