Set Channels; Automatic Channel Searching; Analog Channel Manual Settings; Digital Channel Manual Settings - Philips 40PFT5883/67 User Manual

7 Set Channels

For the initial setup, the system will remind you
to select network connection or TV channel
installation.The Section provides the instructions
on how to reinstall and fine-tune channels.

Automatic Channel Searching

1. Press key.
2. Select Channels > Channel Search and then
press OK key.
3. Press ▲/▼ key to select Start, and press
OK key to enter submenu. Select country/
region, and select your channel type. After
that press OK key to begin automatic
channel searching.
Note

This function can be used only in TV
mode.

Analog Channel Manual Settings

Step 1 Select System
1. Press key.
2. Select Channels > Analog Channel Manual
Installation.
3. Select the color system and sound system
that you need.
Step 2 Search and Store New Channels
1. Press key.
2. Select Channels > Analog Channel Manual
Installation > Find Channel.
You can directly input the channel

frequency.
 Choose to Scan and then press OK key
to begin scanning.
3. Upon searching completion, select Save to
quit the current interface.
Save the searched channels.

Step 3 ATV Fine Tuning
1. Press
2. Select Channels > Analog Channel Manual
Installation > Fine Tune.
3. Select Decrease or Increase to adjust the
frequency.
Note

Frequency fine-tuning can be performed
only when the source is ATV.

Digital Channel Manual Settings

1. Press
2. Select Channels > Digital Channel Manual
Installation and then press OK key.
3. Directly input the channel frequency.
4. Choose Scan and then press OK key to
begin scanning.
EN 15
key.
key.