Use Edid; Use Timer; Change The Preferred Tv Settings; Quick Boot - Philips 40PFT5883/67 User Manual

Use EDID

1. Press key.
2. Select TV Settings > EDID Version and
then press OK key to enter.
3. Select your needed version and then press
OK key to confirm.
Tip
 EDID is a data structure provided by a
digital display to describe its capabilities
to a video source.This settings is valid
only under HDMI source.

Use Timer

You can use Timer so as to switch the TV to
standby after the specified time.
Use Sleep Timer
Set the time when the TV is switched to standby.
Tip

You can switch off the TV or reset the
Sleep Timer before the timer reaches
zero.
1. Press key and then select TV Settings >
Sleep Timer.The Sleep Timer is shown on
the screen.
2. Set the timer to a value between 0 to 240
minutes. If the Sleep Timer is set to 0, it will
be turned off.
3.
Press OK key to turn on the Timer.The TV is
switched to standby when reaching the
preset time.
Change the preferred TV
settings
1. Press
2. Select one of the following and then press
OK key.
 Picture and Sound Reset: restore all TV
picture and sound settings to the preset
values.
EasyLink: set up EasyLink functions.

 About the TV: show the TV related
information.
Key Beep: turn on the key tone of the

remote control.When you press a
button on the remote control, the TV
will make a sound.
 Sleep Timer: switch the TV to sleep
mode after the preset time.
Auto Standby: Switch the TV to auto

standy mode after the preset time.
 Reinstall TV: restore your TV to default
settings.
Time Zone: set the time zone of TV.

 PVR File System:
Select disk: Select the folder where
●
you want to save the recording file.
Format start: format the external
●
USB device.
Speed check: test the reading/
●
writing speed of the USB device.
Software update (OAD): turn on/off

software update (OAD).

Quick Boot


Press
Boot, and press OK key to enter. Press
/ key to select On to enable this
function.
Quick Boot ON: Improve TV boot up
sequence to reduce TV rebooting time.

Press
Boot, and press OK key to enter. Press
/ key to select Off to disable this
function.
EN 12
key to select TV Settings.
key to select TV Settings > Quick
key to select TV Settings > Quick