Table of Contents
Advertisement
Connecting Speakers or Other Audio Receivers
To connect speakers or other audio receivers with an audio cable (not provided), see the illustration below.
Ensure the audio connected devices are switched on before switching on the TV.
When the connection is completed, press
> Speakers > Audio Output and select the SPDIF Only option.
Note:
•
If you prefer to use Audio Return Channel (ARC) or enhanced Audio Return Channel (eARC), please refer
to
Connecting to External Devices > Connecting a Digital Audio System with ARC/eARC
You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.
•
Then press
/
Audio Output to choose Dolby Audio - Dolby Digital to receive the Dolby Digital audio.
Related information
Select Speakers
on page 51
Connecting a Digital Audio System with ARC/eARC
If you would like to use the Audio Return Channel (ARC) or enhanced Audio Return Channel (eARC) feature
to send sound from the TV by a HDMI cable to a digital sound system, you can connect it to the HDMI (ARC/
eARC) port of your TV.
By using this feature, you can also control the sound system with your TV remote instead of using the remote
control from the connected device.
After the connection:
1. Power on the sound system.
2. Press
/
button and select
3. Select Sound > Speakers > Audio Output and choose ARC option. If the device supports eARC function,
press
/
button and select
eARC to set eARC to On.
Note:
•
Audio receiver must support ARC/eARC function.
Connecting to External Devices
button on your remote control and select
Settings icon on the Home screen.
Settings icon on the Home screen, then select Sound > Speakers >
/
button on your remote control, select
41
Settings > Sound > Speakers > Digital
Settings > Sound
in this manual.
Advertisement
Table of Contents
