Change The Preferred Tv Settings; Quick Boot; Software Update - Philips 43PUT6002S/67 User Manual

10 minutes. If the Sleep Timer is set to 0, it
will be turned off.
3.
Press OK key to turn on the Timer.The TV is
switched to standby when reaching the
preset time.
Change the preferred TV
settings
1. Press key to select TV Settings.
2. Select one of the following and then press
OK key.

Picture and Sound Reset: restore all TV
picture and sound settings to the preset
values.

EasyLink: set up EasyLink functions.

About the TV: show the TV related
information.

Key Beep: turn on the key tone of the
remote control.When you press a
button on the remote control, the TV
will make a sound.

Sleep Timer: switch the TV to sleep
mode after the preset time.

Reinstall TV: restore your TV to default
settings.

Shop Mode: choose to turn on or off
Shop Mode.

Time Zone: set the time zone of TV.

PVR File System:
Select disk: Select the folder where
●
you want to save the recording file.
Format start: format the external
●
USB device.
Speed check: test the
●
reading/writing speed of the USB
device.

Software update (OAD): turn on/off
software update (OAD).

Quick Boot


Press key to select TV Settings > Quick
Boot, and press OK key to enter. Press
/ key to select On to enable this
function.
Quick Boot ON: Improve TV boot up
sequence to reduce TV rebooting time.

Press
Boot, and press OK key to enter. Press
/ key to select Off to disable this
function.

Software Update

Philips keeps improving our products.We
suggest that you update TV software when a
new version is launched.
Check the current software version
Press key to select TV Settings > About the
TV > Current Software Info and then press OK
key.The current software version information
will show.
Software Update
You can update the software using the following
methods:

Connect to network for automatic update.
Press
the TV > Auto Software Update and then
press OK key. Update the software
according to the instructions on the screen.

Update the software using an USB storage
device.
1. Press
the TV > Manual Software Update and then
press OK key. Update the software
according to the instructions on the screen.
2. Press
the TV > Local Update and then press OK
key. Update the software according to the
instructions on the screen.
Note

Unplug the USB device after software is
well updated.

For software update, please use a USB
device.The use of a hard disk may result
in update failure and restarting due to
insufficient power supply.
EN 13
key to select TV Settings > Quick
key to select TV Settings > About
key to select TV Settings > About
key to select TV Settings > About