Advertisement
prox. 5 seconds.
2. The display will show 00:00, the temperature indicator
light (T1=green or T2=red) and the clock icon blinking.
3. Turn the dial clockwise to display the daily timer program
from 00:00 till 23:45.
4. Press the dial to exit.
Example of display:
❶
❸
Power level setting in timer operation mode
In timer operation mode, the unit works by default at max power
level. It is possible to change the power level as follows:
1. In timer operation mode, press the control dial and the
power level icon will blink.
2. Turn the dial to choose between min / med / max / max-
+eco.
3.
Press the dial to confirm
Example of display:
❶
❷
min
med
❸
❷
❹
max
max + eco
Please note: If a procedure to modify or monitor the unit
settings is interrupted and no button is pressed for two minutes,
the settings shown on the display will not be maintained and
the appliance will go back to the settings previously displayed.
EXTRA FUNCTIONS
Key-lock
To prevent accidental button activation, it is possible to lock the
keys.To activate this function press the timer button and the con-
trol dial together for at least 3 seconds. The display shows the
symbol
and an acoustic signal will be emitted.
When the appliance is ON and the key lock is activated:
-
buttons and dial are blocked
-
pressing the ON/STAND-BY button 1 time: the unit comes
on in stand by, and the appliance remains in stand-by even
if the ON/STAND-BY button is pressed again.
-
to turn the appliance on again it will be necessary to unlock
the key lock.
When the appliance is OFF and the key lock is activated:
-
all buttons and dial are blocked
-
it's not possible turn on the appliance
To diactivate the function press the timer button and control dial
together, for at least 3 seconds.
Display brightness regulation
After a few seconds of inactivity the display brightness is auto-
matically reduced.
The brightness level during inactivity can be adjusted to the de-
sired level choosing from 3 levels available.
When the appliance is in stand-by press and hold the control dial
for about 5 seconds, the current level of brightness appears.
Turn the dial till the desired brightness is reached, then press the
dial to confirm
Buzzer sound on/off
When the appliance is in stand-by press the control dial for
about 5 seconds, the current level of brightness appears: press
the timer button and turn the dial to modify the status of the
buzzer from On
(l
green) to Off l red) and viceversa.
Press the dial to confirm
16
Advertisement
