Advertisement
How to change the daily timer temperatures
It is possible to change the temperature settings for T1 and T2 to
better suit your needs. T1 is associated to Green light (l) and
can be set at any temperature from 10 to 28°C; T2 is associated
to Red light (l) and can be set from off to anti-frost 5° or to any
temperature from 10° to less than T1.
Min
T1
10°C
Green light
T2
Default
Anti-frost
O
Red light
To change the timer temperature setting, from manual opera-
tion mode:
1. Press the control dial.
2. The power level will blink.
3. Turn the dial till you see the clock icon blinking and press
the dial.
4. A green light will appear on the display blinking. Turn the
dial to choose between green light (T1) or red light (T2) and
press to confirm
5. The temperature digits will blink. Turn the dial to adjust the
temperature according to your needs and press the dial to
confirm.
6. The unit will exit the menu and the display will show the
manual operation settings.
Example of display:
❶
❸
❺
Default
Max
21°C
28°C
Min
5°C
10°C
less than T1
❷
❹
❻
Note: Follow same 6 steps above to set the other daily timer
temperature not previously set.
How to change the daily timer program
1. To change the pre-set daily timer program the unit must be
turned into stand-by mode .
Press the Timer button for approx. 5 seconds.
2. The unit will emit a beep and 00.00 and the blinking green
light symbol will be displayed.
Turn the dial to select the Temperature T1=green light , or
Max
T2=red light, that you would like to have in the room at
00:00 hours and press the dial to confirm.
3. The time digits will start blinking to enable setting the
length of the time interval.
4. Turn the dial clockwise till you reach the desired ending
time for this program interval.
You will be able to choose any time intervals of minutes.
5. Press the dial to confirm the end of the time interval, and
the temperature light will start blinking to enable you to
set the next program interval.
Set the desired program intervals along the 24 hours till
23:45 to complete the daily timer program following the
same procedure described from points 3 to 5.
Example of display:
❶
❸
How to display the daily timer program
You may need to check the settings of the daily timer program.
1. From timer operation mode, press the timer button for ap-
15
❷
❹
❺
Advertisement
