Table of Contents
Advertisement
Chapter 16
I want to:
Visit multiple networks and servers at the same time.
For example,
in a small office, my PC can surf the internet through Router A, but I also
want to visit my company's network. Now I have a switch and Router B. I connect the
devices as shown in the following figure so that the physical connection between my
PC and my company's server is established. To surf the internet and visit my company's
network at the same time, I need to configure the static routing.
How can I do that?
1 Change the routers' LAN IP addresses to two different IP addresses on the same
subnet. Disable Router B's DHCP function.
2 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
Router A.
3 Go to
Advanced
4 Click
Add
and finish the settings according to the following explanations:
Network Destination:
Router A
LAN: 192.168.0.1
192.168.0.100
>
Network
> Routing.
The destination IP address that you want to assign to a static
Customize Your Network Settings
Router B
WAN: 172.30.30.100
LAN: 192.168.0.2
Switch
PC
Company's server
172.30.30.1
113
Advertisement
Table of Contents
