Step 6 - Mars Confort-Aire Century VCD18 Series Installation Manual

Installation and Operation Manual - VCDxxSA
Installation and Operation Manual - VCDxxSA

Step 6

Take out the evaporator and drain pan and rotate 180°
(when your equipment need to be vertical
downed configuration).
Step 7
Adjust the mounting parts position according to the
direction of equipment.
Step 8
Reinstall the evaporator and drain pan.
Step 9
Reinstall T1, T2 sensor plug and tie up the
sensor wires.
NOTICE
The wire body needs to pass through the
wire groove from the drain pan and be
stuck on the hook of the drain pan.
14
14
14
Cut the foam
gasket.
Remove knockouts
as shown in the
figure.
Hook the wire into
the buckle and go
down from the wire
slot.
Replace foam
gasket over wires.