Panasonic S-22MU2E5BN Installation Instructions Manual page 57

<Procedure of CZ-RTC6 series>
Stop the system before performing these steps.
1 Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
Maintenance func
ECONAVI
nanoeX
RC. setting mode
[ ]
2 Press the or
Select "Detailed settings" on the LCD display and press the
button.
The "Detailed settings" screen appears on the LCD display.
3 Select the "Unit no." by pressing the
After selecting "Unit no.", press the
Step 4 .
If the button is pressed, proceed to Step 6 .
4 Select the "Code no." by pressing the
Change the value by pressing the
After selecting "Code no." , press the
Step 5 .
XX=90
XX=91
XX=92
, and buttons
XX / XX
[ ]
button to see each menu.
Electrical component box
XX=93
or button.
button and proceed to
or button.
or button to [0000XX].
button and proceed to
57
Black
Maintenance func
XX / XX
Simple settings
Detailed settings
Auto address
[ ] [ ]
Detailed settings
Unit no. 1-1
Code no. 000010
Set data 0001 0001
[ ] [ ]
Detailed settings
Unit no. 1-1
Code no. 0000XX
Set data 0001 0001
[ ] ] [ ]