Wall Mount Kit Specifications (Vesa) - Samsung HG50ET670UBXEN Install Manual

Table of Contents

Advertisement

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building
materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall
and cause severe personal injury.
• The wall mount kit is not supplied, but sold separately.
• NOTE
– Standard dimensions for wall mount kits are shown in the table below.
– Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
– Do not use screws that do not comply with the VESA standard screw specifications.
– Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
– For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
– Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
– Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
– Do not mount the TV at more than a 15 degree tilt.
– Always have two people mount the TV onto a wall.
VESA screw hole specs
TV size in inches
(A * B) in millimetres
43-55
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric
shock.
C (mm)
200 x 200
20-22
English - 14
Standard
Quantity
Screw
M8
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg50et670uHg55et670uHg43et670u

Table of Contents