Table of Contents
Advertisement
Installing the LED TV Stand
Assembling the Stand and Components
When installing the stand, use the provided components and parts.
A
Stand
1
3
Tight the bottom screw first, and upper screw last.
• Progress the assembly of screw in the manual's order.
NOTE
• Make sure to distinguish between the front and back of each component when assembling them.
• Make sure that at least two persons lift and move the TV.
B
Guide Stand
x 4
(M4 x L14)
x 4 (M4 x L14)
English - 10
BN96-32380B x 4
C
(M4 x L14)
BN96-49315A x 4
D
(M4 x L14)
Screws
2
• Place a soft cloth over the table to protect the TV, and then
place the TV so that its screen faces down toward the table
surface.
• Insert the Stand Guide into the slot on the bottom of the TV.
• Slide and assemble it to the end line in the direction of arrow.
4
(43"-55")
Cable Guide
Advertisement
Table of Contents
