LG 43UP751C User Manual page 92

Network ID
Unique identifier allocated for each user.
Start Frequency (kHz)
Enter a user-defined start frequency range.
End Frequency (kHz)
Enter a user-defined end frequency range.
Set Satellite Setting
You can add/delete/set the satellite you want.
If the programme mode is set to Satellite
Satellite
Select your desired Satellite.
LNB Frequency
Select one value from 9750/10600, 9750/10750, 9750, 10600, 10750, 11300, 5150,
MDU1, MDU2, MDU3, MDU4, MDU5. If you select 9750/10600, 9750/10750(MHz),
22kHz Tone is disabled. If you cannot find the LNB frequency value from the list,
select User and manually enter the frequency.
Some models may not be supported.
Transponder
Select the transponder you want to tune.
22kHz Tone
When using 22kHz Tone switch, select 22kHz or 0 Hz. If you use
Unicable and Motor Type are disabled.
LNB Power
To enable the power supply for the LNB, select On. If you select Off,
disabled.
DiSEqC
92
22kHz Tone,
Motor Type is