Equipping The Massage Head With Accessories; Usage; Switching On; Massage - Silvercrest 76619 Operating Instructions Manual

Equipping the massage head with
accessories
Select, according to the application requirement, an
accessory (0, q, w, e, r, t) for the massage:
The roller accessory 0:
Stimulates the blood circulation. Guide the roller
accessory back and forth over the whole of the
body.
The nub accessory q:
The 21 nubs are suitable for deep massage and
large muscle groups.
The surface accessory w:
Use this accessory on the whole body to relieve
muscle pain and tensions.
The Shiatsu accessory e:
The Shiatsu accessory simulates the finger posture
of a masseur and is suitable for deep massage.
The knead-massage accessory r:
This accessory is suitable for kneading simulation
and deep massage.
The accessory for exacting massage t: Use
this accessory for the massage of individual muscle
groups.
1. Release a possibly fitted accessory from the
massage head 1, in that you hold the grip
cavity 2 and pull it off.
Note:
The roller accessory 0 does not have a recessed grip
2. To pull it off, you can take hold of the roller on the
sides.
2. Place the accessory (0, q, w, e, r, t) of
your choice on the massage head 1 and pay
attention that the round curbs of the massage
head 1 and the accessory (0, q, w, e, r,
t) lie one on top of the other.
3. Push the accessory (0, q, w, e, r, t) onto
the massage head 1 then check to make sure
that it is firmly fixed.

Usage

• Insert the power plug into a wall power socket.

Switching on

• To switch on the Infra red lamp slide the switch
INFRARED
• Slide the switch MASSAGE 5 into the position "I"
for normal vibration.
• For a stronger vibration slide the switch MASSAGE
5 into the position "II".
ATTENTION!
After an extended heating-up of the infra red lamp
9 without bodily contact, the temperature of the
lamp can be perceived as unpleasantly high! Al-
ways check the temperature of the infra red lamp
9 with the tip of a finger before making contact
with the body itself. A temperature that is too high
can be reduced by switching the infra red lamp 9
off for a short period.

Massage

• Hold the Infra Red Massage Appliance by the
grip 7 and, dependant on the application,
place the infra red lamp 9 or the massage
head 1 against the skin.
• Guide the infra red lamp 9 or the massage
head 1 in circular or straight movements slowly
over the skin.
• Massage without applying undue pressure.
• To achieve an optimal effect, try to keep the skin taut.
• Always start the massage at the position furthest
from the heart and then slowly work towards the
heart.
- 29 -
4 into the position "I".